Material Engineering
Department of Manufacturing and Material Engineering
External Assessors
Other methods of ongoing assessment of the relevancy of the programme include the external examiners’ evaluation and the industrial advisory panel’s assessment. For the external examiners’ evaluation, the most recent evaluation was done by Professor Ir. Dr. Shahrum Abdullah who has visited Materials Engineering Programme on 4th October 2017. Previously, there was a visit from the Professor Dr. Stephen John Bull from Newcastle University, United Kingdom on 4 to 5th April 2016. The Materials Engineering Programme is also seeking the advice from the professional or practicing engineers from the industry via Industrial Advisory Panel (IAP). The most recent evaluation was done by Dr. Low Kin Onn on 11 July 2017.
Programme Educational Objectives (PEO)
The PEOs were consistently formulated based on the IIUM mission and KOE mission. The Materials Programme is preparing graduates to achieve the followings in their career and professional accomplishments, within three (3) to five (5) years following graduation. The PEOs are as below;
- Graduates who advance in career and professional standing nationally or internationally based on leadership and/or technical expertise.
- Graduates who demonstrate moral and professional commitment for the betterment of society.
- Graduates who engage in entrepreneurial activities that apply engineering knowledge and technical skills.
- Graduates who engage in lifelong learning through postgraduate education and/or continuous professional development.
This Programme Educational Objectives are clearly stated in the official websites of the Kulliyyah of Engineering (http://www.iium.edu.my/engineering/about-us/mission-vision-peos-pos) as well as posted in several strategic locations around the campus. Students are also made aware of the objectives from the beginning of their study during the session with the Dean on the Taaruf (orientation) week. They are also reminded from time to time throughout the duration of study such as in the majoring briefing session.
Industry Advisory Panel
Materials Engineering at IIUM has established an Industry Advisory Panel (IAP) consisting of industry experts who provide strategic advice on our education and research activities and senior academics.
Benchmarking
The comparison of the Materials Engineering Programme with similar Materials Engineering programme of renowned universities is presented in Table 1.5.
Course Outline & Sypnopsis
Study Plan
- BACHELOR OF ENGINEERING (MATERIAL) (HONOURS)
-
Department of Manufacturing and Material Engineering
Kuliyyah of Engineering, International Islamic University Malaysia
|
SEMESTER 1 |
|||||
|
Course |
Course |
Credit |
CHR (Int) |
Pre-Req |
Co-Req |
|
MATH 1310 |
Engineering Mathematics 1 |
3 |
3 |
|
|
|
EECE 1316 |
Fundamental of Electrical and Electronics |
3 |
3 |
|
|
|
MECH 1340 |
Engineering Mechanics |
3 |
3 |
|
|
|
MTRE 1201 |
CAD and Simulation |
2 |
2 |
|
|
|
UNGS 1201 |
Sustainable Development: Issues, Policies and Practices |
2 |
2 |
|
|
|
UNGS 1301 |
Basic Philosophy and Islamic Worldview |
3 |
3 |
|
|
|
CCUB 1061 |
Usrah 1 |
0.5 |
1 |
|
|
|
LMBD 1131 |
Bahasa Melayu 1 (Int)** |
1** |
|
|
|
|
|
Total |
16.5 |
17 |
|
|
|
SEMESTER II |
|||||
|
Course |
Course |
Credit |
CHR (Int) |
Pre-Req |
Co-Req |
|
MATH 1321 |
Engineering Mathematics 2 |
3 |
3 |
MATH 1310 |
|
|
MFGA 1141 |
Introduction to Engineering Workshop |
1 |
1 |
|
|
|
EECE 1317 |
Engineering Programming |
3 |
3 |
|
|
|
MTRE 1302 |
Fundamental of Materials Science and Engineering |
3 |
3 |
|
|
|
MTRE 1101 |
Materials Engineering Lab 1 |
1 |
1 |
|
|
|
TQTD 1002 |
Tilawah Al-Quran 1 |
0.5 |
0.5 |
|
|
|
LQAD 1003 |
Introduction to Arabic for Quranic Understanding 1 |
0.5 |
0.5 |
TQTD 1001 |
|
|
UNGS 2290 |
Knowledge and Civilization in Islam |
2 |
2 |
UNGS 1301 |
|
|
LEED 1301 |
English for Academic Writing |
3 |
3 |
|
|
|
CCUB 1062 |
Usrah 2 |
0.5 |
|
|
|
|
|
Total |
17.5 |
17 |
|
|
|
SEMESTER III |
|||||
|
Course |
Course |
Credit |
CHR (Int) |
Pre-Req |
Co-Req |
|
MATH 2311 |
Differential Equations |
3 |
3 |
MATH 1321 |
|
|
MTRE 2301 |
Thermodynamics of Materials |
3 |
3 |
|
|
|
MTRE 2302 |
Materials Fluid Dynamics |
3 |
3 |
MATH 1321 |
|
|
MTRE 2303 |
Polymers |
3 |
3 |
MTRE 1302 |
|
|
MTRE 2101 |
Materials Engineering Lab 2 |
1 |
1 |
MTRE 1101 |
|
|
MECH 2342 |
Mechanics of Materials |
3 |
3 |
MECH 1340 |
|
|
LMBD 1132 |
Bahasa Melayu 2 (Int)** |
1** |
1 |
LMBD 1131 |
|
|
|
Total |
16 |
17 |
|
|
|
SEMESTER IV |
|||||
|
Course |
Course |
Credit |
CHR (Int) |
Pre-Req |
Co-Req |
|
MATH 2330 |
Computational Methods and Statistics |
3 |
3 |
MATH 2311 |
|
|
MTRE 2304 |
Extractive and Physical Metallurgy |
3 |
3 |
MTRE 1302 |
|
|
MTRE 2305 |
Heat and Mass Transfer |
3 |
3 |
|
|
|
MTRE 2306 |
Ceramics |
3 |
3 |
MTRE 1302 |
|
|
MTRE 2100 |
Engineering Conceptual Design |
1 |
1 |
|
|
|
MTRE 2102 |
Materials Engineering Lab 3 |
1 |
1 |
MTRE 2101 |
|
|
TQTD 2002 |
Tilawah Al Quran 2 |
0.5 |
0.5 |
TQTD 1002 |
|
|
LQAD 2003 |
Introduction to Arabic for Quranic Understanding 2 |
0.5 |
0.5 |
LGAD 1003 |
|
|
CCUB 2163 |
Usrah in Action 1 (SD:Community Profiling) |
1 |
1 |
CCUB 1062 |
|
|
CCLM 2051 |
Leadership |
0.5 |
0.5 |
|
|
|
|
Total |
16.5 |
16.5 |
|
|
|
SEMESTER V |
|||||
|
Course |
Course |
Credit |
CHR (Int) |
Pre-Req |
Co-Req |
|
MTRE 3301 |
Materials Processing Technology |
3 |
3 |
MTRE 1302 |
|
|
MTRE 3302 |
Materials Characterization and Non Destructive Testing |
3 |
3 |
MTRE 1302 |
|
|
MTRE 3303 |
Component Design and Materials Selection |
3 |
3 |
MTRE 2100 |
|
|
MTRE 3304 |
Composites |
3 |
3 |
MTRE 2304 |
|
|
MTRE 3101 |
Materials Engineering Lab 4 |
1 |
1 |
MTRE 2102 |
|
|
FREE XXXX |
Free Elective |
3 |
3 |
|
|
|
CCFM 2052 |
Family Management |
0.5 |
0.5 |
|
|
|
CCSS |
Skill 1 |
0.5 |
0.5 |
|
|
|
|
Total |
17 |
17 |
|
|
|
SEMESTER VI |
|||||
|
Course |
Course |
Credit |
CHR (Int) |
Pre-Req |
Co-Req |
|
MFGA 3342 |
Project Management and Engineering Economics |
3 |
3 |
MATH 1321 |
|
|
MFGA 3312 |
Quality Control and Improvement |
3 |
3 |
MATH 2330 |
|
|
MTRE 3300 |
Integrated Design Project |
3 |
3 |
MTRE 1302, |
|
|
MTRE 3305 |
Heat Treatment and Microstructure Control |
3 |
3 |
MTRE 2304 |
|
|
MTRE 3306 |
Semiconductors |
3 |
3 |
EECE 1316, |
|
|
CCUB 3164 |
Usrah in Action 2 |
1 |
1 |
CCUB 2163 |
|
|
CCSS 1010/2010/3010 |
Skill 2 |
0.5 |
0.5 |
|
|
|
|
Total |
16.5 |
16.5 |
|
|
|
SHORT SEMESTER |
|||||
|
Course |
Course |
Credit |
CHR (Int) |
Pre-Req |
Co-Req |
|
MTRE 3500 |
Engineering Industrial Training |
5 |
5 |
90 Credit |
|
|
SEMESTER VII |
|||||
|
Course |
Course |
Credit |
CHR (Int) |
Pre-Req |
Co-Req |
|
MFGA 4210 |
Technology Entrepreneurship |
2 |
2 |
MTRE 3300 |
|
|
MTRE 4301 |
Corrosion |
3 |
3 |
MTRE 2304 |
|
|
MTRE 4200 |
Final Year Project 1 |
2 |
2 |
|
|
|
MTRE 43XX |
Programme Elective 1 |
3 |
3 |
|
|
|
FREE XXXX |
Free Elective |
3 |
3 |
|
|
|
UNGS 2380 |
Ethics and Fiqh of Contemporary Issues |
3 |
3 |
UNGS 2290 |
|
|
|
Total |
16 |
16 |
|
|
|
SEMESTER VIII |
|||||
|
Course |
Course |
Credit |
CHR (Int) |
Pre-Req |
Co-Req |
|
GENE 4301 |
Engineering Ethics, Safety and Environment |
3 |
3 |
UNGS 2380 |
|
|
MTRE 4302 |
Surface Engineering and Tribology |
3 |
3 |
MTRE 1302 |
|
|
MTRE 4400 |
Final Year Project 2 |
4 |
4 |
MTRE 4200 |
|
|
MTRE 43XX |
Programme |
3 |
3 |
|
|
|
MCTA 4301 |
Instrumentation and Control System |
3 |
3 |
MATH 2311 |
|
|
|
Total |
16 |
16 |
|
|
PROGRAMME ELECTIVE (3 CHR)
|
Course |
Course |
|
MTRE 4311 |
Nanomaterials |
|
MTRE 4312 |
Smart Materials |
|
MTRE 4313 |
PowderMetallurgy |
|
MTRE 4314 |
Waste Materials Processing |
|
MTRE 4315 |
Electroceramics |
|
MTRE 4316 |
Electronic Packaging |
|
MTRE 4317 |
Failure Analysis of Materials |
